Table of Contents
Advertisement
11/2016 V1.0.61
Manual EIBDoctor
15/56
Getting started
The EIBDoctor is communicating with a connected EIBWeiche device. If you start the
application the first time, you should set the serial COM-port / USB you are using.
To do that, please choose the menu item „Settings -> Generic settings", and a
configuration window will appear. Please select the correct COM-port / USB. After
pushing „OK" the EIBDoctor software will be ready-to-use.
You can start a logging session by selecting „Logging->Start" in the menu or by
activating the button „Start" (green arrow) in the symbol bar.
Menu overview
File
File open
You can open a logging file for investigations when no logging is active. It can be a
binary EIBDoctor log file only, not an exported MS-Excel-TXT file!
If the log file size is very large the EIBDoctor will only load a small part of the telegrams
into the memory, all other telegrams will be loaded automatically on demand, when
the list has to show that informations.
By default the logging files have the file extension ".log". But please note: if the
automatic long-time logging is active, the file extension may also be ".log.001",
".log.002", etc.
File save
You can save the logged telegram data after the recording phase is done. The
informations will be stored in a packed binary format, only the EIBDoctor can read
such files.
Import EIB Analyzer Data
© 1999 - 2016 b+b Automations- und Steuerungstechnik GmbH
Advertisement
Table of Contents
