Table of Contents
Advertisement
9
• Attach shelf support to side of smoker chamber with
one #10-24 X 1/2" machine screw where screw is going
through inside of chamber through hole of support and
secured with one #10-24 flange nut.
• Lay side shelf on top of other end of shelf support so
that it fits inside holding bracket.
• Secure side shelf to smoker chamber using two #10-24
X 1/2"screws and two #10-24 flanged nuts.
Fully tighten all screws and nuts.
10
• Place a fire grate into the bottom of the
firebox. Remaining fire grates may be
placed in the bottom of the smoker
chamber, if desired.
• The height of the grate can be adjusted
by turning it 90 degrees.
Page 12
Nut
Smoker
Screw
Chamber
Firebox
Screw
Shelf
through inside
Support
Smoker Chamber
Smoker
Chamber
Lid
Smoker
Chamber
Fire Grate
Smoker
Chamber
Holding
Bracket
Nut
Advertisement
Table of Contents
