Service Electric Equipments For User; Consent For Cellular Phone Charger; Harness For Working Lamp Mounting; Harness For Auto Cover Of Dump - Daewoo Novus M2SEF Manual

8. SERVICE ELECTRIC EQUIPMENTS FOR USER

Inside the cab
Working lamp
MTF1070
Inside the cab
MTF1090
https://www.truck-manuals.net/
MTF1060
Frame Harness
Cap tilt
Working lamp
Auto grease
MTF1080
Frame Harness
MTF1100
5-167 MISCELLANEOUS CONTROLS AND OPTIONS
1) Consent for cellular phone charger (12V:
Super deluxe)
If do you want to use of cellular phone charger, you
can connect it to the consent installed below the
cassette tape holder.

2) Harness for working lamp mounting

There is special harness available for working lamp
at the inside and outside of cab.
(1) Fuse: F30, 15A
(2) Special harness available for working lamp
switch is located at the inside pannel of black-
out lamp switch.
(3) Special harness available for working lamp is
located at the inside right frame of cab rear.
3) Harness for auto cover of dump (option)
There is special harness available for auto cover
of dump at the inside and outside of cab.
(1) Fuse: F28, 20A
(2) Special harness available for auto cover switch
is covered by an electric tape on the main har-
ness at the inside of glove box.
(3) Special harness is located at the right inside end
of frame.