7.6 Test Report
TS3 can store up to 99 reports.
To pass to previous or following test report use F2, F3 function key. The test numbering restarts from test report nr.1 when
the available memory is full.
Reset or change of store mode (cyclic mode) can be done in the Setup Menu (see chapter 7.1).
To scroll the report screen use the keys or knob.
7.7 Info Menu
To enter this function see menu tree (see chapter 6.3)
In this menu the following information are available: Firmware version and system settings.
888.902.6111
Report number / total reports in memory
Figure 14
TS3
1SDH000670R0002
www.intellirentco.com
|
To following Report
To previous Report
L3852
23/44