Setup; Unfolding The Handle - Toro 29730 Operator's Manual

117-4143
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts and keep all guards
and shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not mow up and down slopes, only mow across;
stop the mower and engine, pick up debris before operating;
look behind and down when reversing.

Setup

Important: Remove and discard the protective plastic
sheet that covers the engine.
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove the handle knobs and bolts from the machine
housing ().
2. Attach the handle to the machine housing ().
1. Bolt
3. Move the handle to the operating position
4
Figure 3
2. Knob
(Figure 4).