Safety Precautions - LG AC Ez Touch PACEZA000 Installation Manual

SAFETY PRECAUTIONS

2
SAFETY PRECAUTIONS
• This product must be installed by an installation professional from an LG authorized service
center.
• Any issues stemming from an installation by an unauthorized person is the responsibility of
the user and will not be covered by warranty.
• The following safety precautions are to prevent any unforeseen dangers or damage.
• This product has been designed for business use, or for areas outside the home, and has
passed the Electromagnetic Interference Test.
WARNING
!
It can result in serious injury or death when the directions are ignored.
! CAUTION
It can result in minor injury or product damage when the directions are ignored.
! WARNING
Installation
• When you re-install this product, please contact your Supplier or Installation Company to carry
out the work.
- If someone inexperienced installs the product, it may result in fire, electric shock, explosion,
injury, or failure of the product.
• Ensure there is no damage the power cable.
- It may cause fire or electric shock.
• When you perform any electrical work, please contact the Supplier or Installation Company.
- If an inexperienced person performs the disassembly or repair, it may cause fire or electric
shock.
• Install the product that can avoid rain water.
- If water enters into the product, it may cause product failure.
• Do not install the product at a place with a lot of moisture.
– If moisture enters the product, it may cause product failure.
• Make sure to contact the Supplier or Installation Company for the product installation.
- If someone inexperienced installs the product, it may result in fire, electric shock, explosion,
injury, or failure of the product.
• Please ensure an electrical engineer perform the electric work based on the installation manu-
al and the designated circuit diagram.
- If incorrect wiring is used, or inexperienced engineer performs the electric work, it may
cause fire or electric shock.
• Do not place the product near an electric fire.
- It may cause fire.
• Avoid installing this controller in an area with sensitive electronic equipment.
- It may cause electrical interference with sensitive electronics.
• Install the product fixed firmly.
- If the product is not securely fixed, it may fall and become damaged.
• Correctly install the product after fully studying the provided manual.
- It may cause fire or electric shock.
• During the wiring, do not use non-standard cable and do not force or extend the cable.
- It may cause fire or electric shock.
• During the wiring of the power cable and communication cable, firmly fix the cable.
- If the cable is loose, it may cause fire or electric shock.