Bluetooth Connectivity - Bowers & Wilkins PI5 Manual

5. Bluetooth Connectivity

5.1 Pairing
Your Bowers & Wilkins PI5 earphones are designed to stream music wirelessly from Bluetooth audio
devices, such as smartphones, tablets, or computers. To do so, the earphones & device must first be
paired.
When you receive your PI5 earphones they will be ready to pair to any Bluetooth audio device.
1. Open the charge case lid with the ear buds places inside the charge case
2. The charge case indicator will flash blue
3. Go to the Bluetooth pairing menu of your device
4. Select the "Bowers & Wilkins PI5" from the device list
5. The charge case indicator will change to solid blue to indicate pairing is sucessful
To pair to a subsequent device
1. Open the charge case lid with the ear buds places inside the charge case
2. Press and hold the button inside the charge case for between 1 and 5 seconds
3. The charge case indicator will flash blue
4. Go to the Bluetooth pairing menu of your device
5. Select the "Bowers & Wilkins PI5" from the device list
6. The charge case indicator will change to solid blue to indicate pairing is sucessful
Your heapdhones can remember up to eight paired Bluetooth Devices. Repeat the above steps to
pair more devices.
Note: Your earphones will automatically exit Bluetooth pairing mode if no device is paired within 5
minutes. If pairing fails, the indicator will rapid flash blue, please try pairing again
7