Maintaining the Printer
Important:
c
Wipe off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
6. Use a new dry cotton swab to wipe the film.
Important:
c
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
7. Repeat steps 5 and 6 until the film is not smeared.
8. Visually check that the film is not smeared.
9. Close the scanner unit.
Note:
The scanner unit is designed to close slowly and resist a little as a precaution against catching fingers. Continue to close
even if you feel some resistance.
>
Improving Print, Copy, and Scan Quality
93
>
Cleaning the Translucent Film