Linksys USBBT100 Quick Installation Manual page 7

3
Using The Bluetooth Setup Wizard
Before you can begin using the Adapter, you must run the Bluetooth
Setup Wizard. Right-click the Bluetooth System Tray Icon and select
Bluetooth Setup Wizard from the menu that appears. This will open
the Bluetooth Setup Wizard.
The Wizard gives you four choices:
I know the service I want to use and I want to find a Bluetooth device
that provides that service.
Bluetooth devices provide many services. Select this option when you
wish to find a device for a specific service.
I want to find a specific Bluetooth device and configure how this
computer will use its services.
Already know the device you wish to select? Chose this option when
you wish to find a service for a specific device. This option is recom-
mended for users who are not familiar with Bluetooth devices.
I want to configure the Bluetooth services that this computer will pro-
vide to remote devices.
As the Adapter communicates with other Bluetooth devices, so are
they communicating with the Adapter. Select this option to configure
the services the Adapter provides for other devices.
For information on Applications and Services, see Appendix B: Blue-
tooth Applications and Services.
I want to change the name and/or device type that this computer
displays to other Bluetooth devices.
Personalize how the Adapter appears to other Bluetooth devices.
From this screen (not shown), you can click Next to proceed with the
Wizard or Cancel to exit the Wizard.
Use the Wizard to configure those options you must. Not all options
must be configured. These options are provided in detail on the fol-
lowing pages.
7