Carton Inventory
Your garage door opener is packaged in one carton
which contains the motor unit and all parts illustrated
below. Accessories will depend on the model
purchased. If anything is missing, carefully check the
packing material. PARTS MAY BE STUCK IN THE
Lighted Door Control Button
with (2) screws 6ABx1-1/2"
2-Conductor Bell Wire
White & White/Red
"U" Bracket
Rail
Front (header)
Section
Safety Sensor
Bracket (2)
Idler Pulley
Chain and Cable in
Dispensing Carton
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White
& White/Black Bell Wire attached
6
FOAM. Hardware for assembly and installation is
shown on the next page. Save the carton and
packing material until installation and adjustment is
complete.
Motor Unit with a Light Lens
Trolley
Rail
Center/Back
Sections
Door Bracket
Curved Door
Arm Section
Hanging Brackets
Chain Spreader
Header Bracket
Straight Door
Arm Section
Safety Labels
and
Literature