Install Chain/Cable; Attach Sprocket Cover - Chamberlain 5100-2K Owner's Manual

1/2hp
Table of Contents

Advertisement

Assembly Step 4
Install the Chain/Cable
& Attach the Sprocket Cover
Dispensing Carton
Keep Chain and Cable
Taut When Dispensing
• Detach the cable loop from the carton and fasten it
to the trolley with a master link from the hardware
bag. See master link procedure, Figure 1.
• With the trolley against the screwdriver, dispense
the cable around the pulley.
• Proceed back around the opener sprocket,
eep Chain and Cable
Figure 2. Be sure sprocket teeth engage the chain.
aut When Dispensing
Continue forward to the trolley threaded shaft,
Figure 3.
• Use the second master link to connect the
chain to the flat end of the shaft. Check to
make sure the chain is not twisted.
• Remove the screwdriver.
Install Chain and Cable
In This Direction
stall Chain & Cable
Chamberlain '92
8/22/90 - 3/6/92
Install Chain and Cable
In This Direction
Sprocket
Cover
Front Tab Slot
Mounting
Leave Chain and Cable
Inside Dispensing
Carton to Prevent Kinking.
Cable
Loop
Cable
Pulley
Back Tab Slot
Sprocket
Cover
Top of Opener
Back Tab Slot
Top of Opener
Plate
Serious injury can result if fingers become
entangled in moving opener sprocket. Attach
sprocket cover securely. Never operate opener
while your hand is near the opener sprocket.
Figure 2
Master Link
Clip-On Spring
Master
Link Cap
Master Link
Clip-On Spring
Master
Link Cap
Master
Cable
Link Bar
Loop
Cable
Pulley
To attach the sprocket cover:
• Insert the back tab in the opener slot. Squeeze the
cover slightly and insert the front tab in the slot on
the mounting plate.
10
WARNING
Master Link
Clip-On Spri
Master
Link Cap
Flat End of Tro
Threaded Sha
Figure 3
Master Link
Clip-On Spring
Master
Link Cap
Flat End of Trolley
Threaded Shaft
Trolley
Trolley
Master
Link Bar
Figure 1
Master Link Procedure:
Push pins of master link bar through
cable loop and hole in front end of
trolley. Push cap over pins and into
notches. Slide clip-on spring over cap
and into notches until both pins are
securely locked.
Opener
Sprocket
Chain
T-rail
Pin Notch
Pin

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents