The picture settings have been
adjusted at the factory under optimum
signal reception conditions. However,
you can adjust for BRIGHTNESS,
CONTRAST, COLOUR and SHARP-
NESS to your preference.
NOTES:
• The picture settings can only be adjusted
when they are displayed on screen.
• Pressing CANCEL will return all
adjustments to their factory preadjusted
levels. This function is available in
adjusting picture mode.
• TINT will appear only when the NTSC
Colour System is selected.
5J20301A P08-17
1
2
3
15
PICTURE ADJUSTMENTS
Press SETUP/MENU.
Press
or
to select the
PICTURE mode, then press
SELECT/ENTER.
To adjust the BRIGHTNESS,
press
or
, then press
NOTE: Each time
is pressed, the on screen display will
change as shown below.
BRIGHTNESS
CONTRAST
(TINT)
SHARPNESS
Press SETUP/MENU twice to return to normal TV screen.
23/4/03, 1:04 PM
MENU
CHANNEL SETUP
PICTURE
AV COLOUR PAL
LANGUAGE
PRESS:
/
/ ENTER / MENU
.
BRIGHTNESS
0
PRESS: B / A / C / D /MENU
COLOUR
15