Alpine i407-WRA-JL Installation Manual page 6

Factory Unit Disassembly Process
1
As a precautionary measure it's a good idea to
mask out the dashboard and panels to prevent
scratches.
3
Unsnap 10 clips, unplug the 2 harnesses, and
remove HVAC panel using a panel removal tool.
5
Unsnap 6 clips and remove radio bezel using a
panel removal tool.
i407-WRA-JL
2
Unsnap the 6 clips and loosen the knee panel under
the steering wheel using a panel removal tool.
4
Use #2 Phillips Screwdriver to extract (2) screws
from the bottom of the radio bezel.
6
This shows where all the OEM clips are at to
remove for step 5.
Jeep Wrangler
20210330v1
˜ 6/22