Item
Push
S
to enter the Setup menu to change operating parameters. See
Push
T
to enter the Tasks menu. See
Push
U
to release pressure at the internal pressure port. VENTING shows on the display
as the Product vents. VENTED shows after venting is complete.
Q
: Use this function to output (source) a target pressure from the Product. Use the arrows
to select the Setpoint field and enter the values with the number buttons.
L
: Use this function for pressure measurement mode.
Push
G
to enter HART communication mode.
Push
H
to freeze the reading on the display. Push
the display. Push and hold to capture the screen and save into memory.
Table 2. Buttons (cont.)
Description
Tasks
Menu.
Automatic Pressure Calibrator
Setup
H
a second time to release the hold on
Buttons
Menu.
5