Residual Risks; Specific Safety Rules For Dust Extractors - DeWalt XR Li-ion DWH161 Original Instructions Manual

Universal dust extractor
Hide thumbs Also See for XR Li-ion DWH161:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
to another. Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or appliance that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or appliance to fire or excessive
temperature. Exposure to fire or temperature above 40 °C may
cause explosion.
Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.

Specific Safety Rules for Dust Extractors

The appliance may only be used by persons who are familiar
with it, have been trained on how to use it safely and who
understand the resulting hazards.
When picking up dusts with an exposure limit value,
precautions must be taken to ensure adequate air exchange in
the room if the exhaust air from the appliance is released into
the room. Be aware of the corresponding national regulations.
Operator should observe any safety regulations to the material
being handled.
Do not use to vacuum combustible explosive materials, such
as coal, grain, or other finely divided combustible material.
Do not use the appliance to pick up liquids or wet dirt
Do not use in areas where flammable or combustible liquids
are present.
Do not use to vacuum hazardous, toxic or carcinogenic
materials, such as asbestos or pesticide, unless the vacuuming
of the material is specifically identified in this instruction
manual as an approved use.
Static shocks are possible in dry areas or when the relative
humidity of the air is low. This is only temporary and does not
affect the use of the dust extractor.
To avoid spontaneous combustion, empty the canister after
every use.
Some wood contains preservatives which can be toxic. Take
extra care to prevent inhalation and skin contact when
working with these materials. Request and follow any safety
information available from your material supplier.
Do not use vacuum as a step ladder.
Do not place heavy objects on dust extractor.

WARNING: To reduce the risk of fire, electric shock and
injury:
Do not pick up anything that is burning or smoking,
such as cigarettes, matches or hot ashes.
Do not use without filter in place.

Residual Risks

In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
Impairment of hearing.
Risk of personal injury due to flying particles.
Risk of burns due to accessories becoming hot
during operation.
Risk of personal injury due to prolonged use.
SAVE THESE INSTRUCTIONS
Chargers
D
WALT chargers require no adjustment and are designed to be
e
as easy as possible to operate.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.
Your D
WALT charger is double insulated in
e
accordance with EN60335; therefore no earth wire
is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the plug.
Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to Technical Data).
Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.

WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
English
WALT
e
; the maximum length
2
5

Advertisement

Table of Contents
loading

Table of Contents