Connecting A Casio Bn/Pv Unit To A Pc - Casio PV-750 Plus User Manual

Connecting a CASIO BN/PV Unit to a PC

Chapter 2 – Connecting a CASIO BN/PV Unit to a PC
To find out how to operate the Pocket Viewer (PV), consult the User's Guide for the Pocket
Viewer.
Important!
Be sure to turn off the power of both your BN/PV Unit and computer before connecting
them. Failure to do so can result in damage to the BN/PV Unit, your computer, or the
cradle (cable).
To connect the cradle to your computer
1. Plug the connector at the end of the cradle's cable / cable (PV 200e) into your computer's
serial port (RS-232C).
• The serial port is normally labeled COM1, COM2, COM3, or COM4.
• If the serial port on your computer does not match the cradle's / cable's connector, you
need to purchase an adaptor. See the documentation that comes with your computer for
details.
7