Download Print this page

Warranty And Service; Troubleshooting Guide - Braun MultiQuick 9 Manual

Hide thumbs Also See for MultiQuick 9:

Advertisement

Available languages

Available languages

Refer to the Processing Guide E for maximum
quantities and speeds.
Maximum operation time for the grinder is
20 seconds.
Care and Cleaning (F)
• Always clean the hand blender and the suitable
accessories thoroughly for first use and after
every use with water and detergent.
• Unplug hand blender before cleaning.
• Do not immerse the motor part (4) or gearboxes
(8a, 9a) in water or any other liquid. Clean with a
damp cloth only.
• The lid (11a/12a) can be rinsed under running
water. Do not immerse in water, nor place in a
dishwasher.
• To reuse the grinder knife make sure that it is
absolutely dry after cleaning.
• For better cleaning it is possible to disassemble
the Stand for storing.
• All other parts can be cleaned in a dishwasher.
Do not use abrasive cleaners that could scratch
the surface.

Troubleshooting Guide

Problem
Hand blender does
not operate.
Hand blender is hot
and does not operate
Possible cause
No power
Device is overheated and overheat
protection is activated
• You may remove the anti-slip rubber rings from
the bottom of the bowls for an extra thorough
clean.
• When processing foods with high pigment
content (e.g. carrots, or curcuma), the
accessories may become discolored. Wipe these
parts with vegetable oil before cleaning them.

Warranty and Service

For detailed information see separate warranty and
service leaflet or visit www.braunhousehold.com.
Both the design specifications and these user
instructions are subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at appropriate
collection points provided in your country.
Materials and accessories coming into
contact with food conform to EEC
regulation 1935/2004.
Solution
Check appliance is plugged in.
Check the fuse /circuit breaker in your
home.
If none of the above contact Braun
Service.
Let the device cool down one hour.
After that time the hand blender is
usable again.
11

Advertisement

loading

This manual is also suitable for:

Hb901ai