Flash Memory Image Parameter Set - Casio PX-410R Supplementary Manual

Data Format
Bulk dumping SMF data transfers the data with a 128-byte header appended as shown below. The header data starts with
an 8-byte file name, which is displayed by this Model after receipt.
Header 128Bytes
SMF Data
39

Flash Memory Image Parameter Set

This Parameter Set is used for dumping flash memory contents. One Parameter Set corresponds to an image block
of 2 Mbytes of flash memory. The 4 Mbytes of flash memory of this Model is made up of two blocks, so two
Parameter Sets are used.
System Exclusive Format
Field Value
01 SYSEX F0
02 MAN 44
03 MOD 11,02
dev
04 00 to 1F, or 7F
act
05 04(HDS), 05(HDR), 07(Control)
cat
06 Flash Memory Image = 11
prm
07 00
ilen/dlen See "IV This Model's System Exclusive Message".
08
ps
09 Indicates the Flash Image Block Number being transferred.
For details, see "40 About Parameter Set (PS) numbers".
index
10 See "IV This Model's System Exclusive Message".
data
11 See "IV This Model's System Exclusive Message".
sum
12 See "IV This Model's System Exclusive Message".
13 EOX F7
Name 8Bytes
Reserved 120Bytes
67