Adjusting The Metronome Volume - Casio Celviano AP-24 User Manual

Casio celviano ap-24: users guide
Hide thumbs Also See for Celviano AP-24:
Table of Contents

Advertisement

3
Change the tempo setting as described below.
• A note does not sound when you press a keyboard
key while holding down the CONTROL button
(Figure d).
• While holding down the CONTROL button, press
keyboard key A
(–) to decrease tempo or B
2
increase it. Holding down either keyboard key
changes the setting at high speed. Pressing keyboard
key A
(–) and B
2
2
tempo setting to 120.
• You can also change the tempo setting (beats per
minute) by holding down the CONTROL button and
using keyboard keys B
from 0 to 9 (Figure c). You can input a two-digit or
three-digit tempo value. Note that the tempo value
you input is applied when you release the CONTROL
button. The tempo setting does not change if you
input a one-digit value or a value that is outside of
the allowable setting range.
• The tempo can be set within the range of 30 to 255
(beats per minute).
4
When you want to stop the metronome, press the
METRONOME button again.
• Pressing the METRONOME button again restarts the
metronome sound using the current beat and tempo
setting.
• If you want to change both the tempo and the beat
before restarting the metronome, perform the above
procedure here.
NOTE
• You can change metronome beat and tempo settings at
any time, even while the metronome is sounding.
• You can also use the metronome in combination with
memory play. See the section of this User's Guide
covering the function for details.
420A-E-019A
(+) at the same time changes the
through A
to input values
2
3

Adjusting the Metronome Volume

Use the following procedure to increase and decrease the
volume of the metronome beat.
(+) to
2
To adjust the metronome volume
1
While holding down the CONTROL button, use
the keyboard's B
volume level (Figure a). The setting range is 000
to 127.
* A note does not sound when you press a keyboard
key while holding down the CONTROL button.
NOTE
• The metronome volume is automatically set to 110
whenever you turn on the digital piano.
Basic Operation
(–) and C
(+) keys to adjust the
1
2
E-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents