Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
5.
After the manual white balance operation is
complete, press
6.
Select "Exit".
NOTES
• White balance is automatically set to "Daylight" when-
ever you enter the Night Scene Mode. You can leave
this as it is or change it using the above procedure.
• The effects of the Landscape Mode color filters (page
E-70) are cancelled out by a manual white balance op-
eration.
E-76
.
Specifying Power On Defaults
A power on default is one that is automatically used by the
camera when you turn it on. You can specify power on de-
faults for focus, flash, metering, white balance, flash inten-
sity, syncro speed and sensitivity.
The following tables show the items for which you can
specify power on defaults. Note the following rules concern-
ing power on defaults.
• There are two sets of power on defaults, named Mode 1
and Mode 2.
• When "On" is specified for an item, the camera remembers
the current setting for that item when you turn off power,
and uses the same setting when you turn power back on
again.
• When "Off" is specified for an item, the camera always
uses its standard power on default, as shown in the "Off"
columns in the tables below.
Advertisement
Table of Contents
