Deleting the Last Image Recorded in the
REC Mode
Normally, you need to enter the PLAY mode (page E-109) to
delete an image. The following procedure lets you delete the
image you just recorded without leaving the REC mode.
IMPORTANT!
• Note that the image delete operation cannot be un-
done. Make sure you really do not need an image be-
fore you delete it.
1.
In the REC mode, press PREVIEW to display
the last image you recorded.
2.
Press AE-L
.
3.
In response to the confirmation message that
appears, select "Yes".
• Select "No" to cancel the delete operation without de-
leting anything.
4.
Click the control button.
• This deletes the image and returns to the REC mode
screen.
OTHER RECORDING FUNCTIONS
The following describes the flash settings you can make to
suit a variety of lighting needs.
Selecting the Flash Mode
Use the following procedure to select the flash mode.
1.
Align the power/function switch with
2.
Press to cycle through
the available flash modes
until the indicator for the
one you want is on the
monitor screen.
E-55
Using the Flash
Flash
mode
.