Casio Exilim EX-M20U Function Manual page 19

OTHER RECORDING FUNCTIONS
When you want to assign this function to
[ ] and [ ] keys:
Recording mode
• [ ] and [ ] cycle through recording
modes.
• EX-S20U: Snapshot, BESTSHOT
• EX-M20U: Snapshot, BESTSHOT,
Snapshot Audio, Voice Recording
(page 168)
Flash mode
• [ ] and [ ] cycle through the flash
mode settings (page 47).
EV shift
• [ ] decreases compensation, [ ]
increases compensation (page 55).
White balance setting
• [ ] and [ ] cycle through white
balance settings (page 56).
ISO sensitivity
• [ ] and [ ] cycle through ISO
sensitivity settings (page 70).
No function assigned
NOTE
• The initial default setting is "REC Mode".
Assigning Functions to the [ ] and [ ]
Select this:
Keys
A "key customization" feature lets you configure the [ ]
and [ ] keys so they change camera settings whenever
REC Mode
they are pressed in the REC mode. After you configure the
[ ] and [ ] keys, you can change the setting assigned to
them without going through the menu screen.
1.
Flash
2.
EV Shift
3.
White Balance
ISO
Off
73
In the REC mode, press [MENU].
Select the "REC" tab, select "U/D Key", and
then press [ ].
Use [ ] and [ ] to select the setting you
want, and then press [SET].