Account Setup - Honeywell Performance Series User Manual

Date and Time
Parameter
Date Format
Time Format
Time Zone
Current Time
Sync PC
DST
NTP
NTP Server
Port
Update Period

Account Setup

The system supports up to 15 characters for the user name or user group name. You can use
letters, numbers, and the underscore character (_) for the user or group name.
You can configure up to 18 users and eight groups (default factory settings). The factory default
setup includes two user levels: user and admin (case-sensitive).
Figure 5-30 Date and Time Configuration Interface
Table 5-20 Date and Time Configurations
Function
Select a date format from the drop-down list.
Select a time format, either 24-hour or 12-hour.
Select the time zone for the camera.
Set the camera's time and date. Click Save to activate this time.
Click to sync the camera's time with your PC's time.
Set when Daylight Saving Time begins and ends. Select either Date or
Week mode.
Click to enable NTP.
Enter the NTP time server name/address.
Configure the port for the NTP time server.
Configure the synchronization periods between the camera and the
time server.
Configuring Camera Settings | 65
800-22756 - B - 04/2017