Qos; Configuring Storage Settings; Recording Schedule And Snapshot Schedule - Honeywell Performance Series User Manual

QoS

Quality of Service (QoS) is a network security mechanism. It fixes problems with network delay
and jams. For network service, for example, the quality of service includes the transmission
bandwidth, delay, and packet loss. Through QoS, we can guarantee the transmission
bandwidth, reduce the delay, reduce the loss of data packets, and enhance the quality with
packet prioritization.
Parameter
Realtime Monitor
Command

Configuring Storage Settings

Recording Schedule and Snapshot Schedule

You can add or remove schedules for recording and snapshots. There are three recording
modes: General (auto), Motion Detection and Alarm. You can configure up to six recording
periods per day.
Figure 5-21 QoS Configuration Interface
Table 5-14 QoS Configurations
Function
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
This value ranges from 0 to 63. The router or the switcher can provide
different service for different packets.
Note Ensure that you have enabled the corresponding recording mode in

Setup Storage

Conditions.
Configuring Camera Settings | 59
800-22756 - B - 04/2017