Lighting Instructions - Capital Performance Series PSQSB2000 Use And Care Manual

lighting instructions:

WARNING:
Keep hands and face away from front of burner!
STAND TO THE SIDE WHEN LIGHTING. ONCE LIT
MOVE HAND AWAY QUICKLY!
10
13 7
Lighting The Side Burner:
Note: Open the side burner lid and/or remove the top
grate cover before lighting. Turn all knobs to "OFF."
Turn the main gas supply on. If you smell gas,
shut-off gas-supply and call for service.
Push and hold the ignition button and turn the selected
burner knob to "HIGH." If the burner does not light
within 4 to 5 seconds, turn knob "OFF" and wait 5
minutes before trying again for any accumulated gas
to dissipate.
Your PSQSB2000 side burner is equipped with the
same sealed burners we use on our indoor residential
ranges. Each burner is rated at 15,000 BTU/HR and
has a battery ignition for efficient lighting. The burner
grates are porcelain enamel over cast iron for
maximum durability. The side burner cover protects
the Side Burners from dust and debris and also acts
as a work surface. When using the grill burners with
the Side Burner cover in place, be careful as heat can
conduct from the grill section and cause the cover to
heat up.
WARNING! NEVER attempt to light the side
burner with the cover in place.
Flame Height:
The correct height of the flame depends on the
size of and material of the utensil being used,
the food being cooked and how much liquid is in
the utensil. Here are some basic rules for
selecting the flame height.
Flame should never extend beyond the bottom
of the pan.
Utensils that conduct heat slowly (such as
glass-ceramic) should be used with a low or
medium flame, unless you are cooking with a
large amount of liquid.