Setting; Setting Menu - Canon LV-5200 Owner's Manual

SETTING

1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button(s) to move the
red frame pointer to the SETTING icon.
2 Press the POINT DOWN button to move the red frame pointer to
the item that you want to set and then press the SET button.
The setting dialog box appears.
Language
The language used in the ON-SCREEN MENU is available in
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean, and Japanese.
Keystone
This function corrects the distorted image. Select either Store or
Reset, and then press the SET button. The keystone dialog box
appears. (Refer to page 20.)
Store ···· stores the keystone adjustment data when the AC
Power Cord is disconnected.
Reset ···· resets the keystone adjustment data when the AC
Power Cord is disconnected.
Blue back
When this function is "On," the projector produces a blue image while
the input signal is not detected.
Display
This function decides whether to display the On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· sets the On-Screen Displays disappeared except;
G ON-SCREEN MENU
G "Power off?" message
G P-TIMER
G "No signal" message
G "Wait a moment!" message
Logo
When this function is "On," the projector displays our logo when
starting up.
Ceiling
When this function is "On," the picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounted projector.
Rear
When this function is "On," the picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Terminal
RGB IN 1 / OUT terminal on the back of the projector can be used as
computer input or monitor output by switching with the POINT
LEFT/RIGHT button. (See the right Note.)
To use the terminal as computer input, select Computer 1.
To use the terminal as monitor out, select Monitor out.
36

SETTING MENU

SETTING MENU
Set the pointer to the
item and press the
SET button.
Move the pointer to the item
and then press the POINT
LEFT/RIGHT button(s).
Ceiling function
Rear function
NOTE
G This Terminal item cannot be selected when the
input source is selected as "Computer 1" in the
"SELECTING THE INPUT SOURCE" (P22).
SETTING Menu icon
When pressing the SET
button at Language, the
Language Menu appears.