Canon PIXMA iP3500 Series Quick Start Manual page 31

5
Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head.
Make sure the position of the tank matches the
label (A).
(2) Press on the
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
Important
The printer cannot be used unless all the ink tanks are
installed.
6
Close the Top Cover.
Note
If the ALARM lamp still flashes orange after the Top Cover is closed, see "ALARM Lamp
Flashes Orange" on page 64.
When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes. The
POWER lamp flashes green during cleaning.
mark on the ink tank until
(3)
Routine Maintenance
(A)
(1)
(2)
27