Printing The Nozzle Check Pattern - Canon PIXMA iP100 Series Quick Start Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head
nozzles.
Note
Printing the Nozzle Check Pattern Without a Computer
The nozzle check pattern printing can also be performed without a computer, using the RESUME/
CANCEL button.
1. Make sure that the printer is on and then load a sheet of A4 or Letter-sized plain paper in the
Rear Tray.
2. Set the Paper Thickness Lever to the right. For details on the Paper Thickness Lever, refer to
"Front View" in "Main Components" of the User's Guide on-screen manual.
3. Hold down the RESUME/CANCEL button until the Power lamp flashes green twice, and then
release it immediately.
The nozzle check pattern is printed. Do not open the Print Head Cover while printing.
Examine the pattern and take the appropriate action. See "Examining the Nozzle Check Pattern" on
page 27.
1
Make sure that the printer is on and then load a sheet of A4 or Letter-sized plain
paper in the Rear Tray.
Set the Paper Thickness Lever to the right. For details on the Paper Thickness Lever, refer to
"Front View" in "Main Components" of the User's Guide on-screen manual.
2
Open the printer properties dialog box.
3
Print the Nozzle Check Pattern.
(1) Click the Maintenance tab.
(2) Click Nozzle Check.
(3) Confirm the displayed message and click Print
Check Pattern.
The nozzle check pattern is printed. Do not
open the Print Head Cover while printing.
Note
Clicking Initial Check Items displays the items to
be checked before printing the pattern.
4
Examine the pattern and take the appropriate action.
See "Examining the Nozzle Check Pattern" on page 27.
Routine Maintenance 25