MANO522 Mini ITX Motherboard
2.4.11
LAN and USB 3.0 Connectors (CN26 and CN27)
The motherboard comes with two high performance plug and play Ethernet interfaces
(RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be
established by plugging one end of the Ethernet cable into this RJ-45 connector and the
other end to a 1000/100/10 Base-T hub.
The Universal Serial Bus (compliant with USB 3.0) connectors on the rear I/O are for
installing USB peripherals such as keyboard, mouse, scanner, etc.
Pin
LAN Signal
Tx+ (Data
L1
transmission positive)
Rx+ (Data reception
L3
positive)
L5
RJ-1 (For 1000
Base-T only)
L7
RJ-1 (For 1000
Base-T only)
A
Speed LED
Note
Pin
USB Signal
1
USB3_POWER
3
USB +
5
USB3_SSRX
7
GND
9
USB3_SSTX+
2.4.12
Audio Jack (CN28)
The motherboard provides HD audio jack on the rear I/O. Install audio driver, and then
attach audio devices to CN28.
Pin Color
Green
Pink
18
Pin
LAN Signal
Tx- (Data transmission
L2
negative)
RJ-1 (For 1000 Base-T
L4
only)
L6
Rx- (Data reception
negative)
L8
RJ-1 (For 1000 Base-T
only)
B
Active LED
Speed LED turns orange for 1000Mbps or green for 100Mbps.
CN26/CN27 supports Wake-on-LAN.
Pin
USB Signal
2
USB -
4
GND
6
USB3_SSRX+
8
USB3_SSTX
Signal
Line-out
MIC-in
CN26
LAN1
USB
CN27
LAN2
USB
Board and Pin Assignments