Download Print this page

Kohler Archer K-1947-GHRW Quick Start Manual page 2

Alcove heated bubblemassage air bath with bask

Advertisement

Required Electrical Service
Two dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower, Heated
120 V, 15 A, 60 Hz
Surface:
Heater:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Three-wall alcove
Drain location:
Right
Basin area, bottom:
45-1/8" x 19-11/16" (1146 mm x 500 mm)
Basin area, top:
52-1/8" x 22-1/16" (1324 mm x 560 mm)
Weight:
100 lbs (45.4 kg)
Water depth:
15-1/8" (384 mm)
Water capacity:
57 gal (215.8 L)
Electrical component
Blower: 120 V, 10 A, 60 Hz
rating:
Heated Surface: 120 V, 0.5 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-30-2019 03:41 - US
alcove Heated BubbleMassage
air bath with Bask
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
ADA compliant when installed to the specific
requirements of these regulations.
Archer
K-1947-GHRW
15-9/16"

Advertisement

loading