Questions And Answers; Replacement Filters - Fedders TRION Installation Operation & Maintenance

Reinstalling the Filter Assembly
Wipe down the interior and outside of the cabinet with a
soft, dry cloth.
Re-assemble the Filter Assembly.
Make sure the filters are dry before reinstalling.
Using the handle, lower the Filter Assembly into the cabinet.
The tabs in the cabinet and notches in the Filter Assembly
end plates ensure the filter is correctly positioned.
Replace the Filter Access Cover. An electrical interlock switch
prevents the unit from operating if the Filter Assembly or
Filter Access Cover is not replaced correctly.
Note: An occasional 'arcing' sound is normal when
operating the unit immediately after cleaning and should
stop within a few minutes of operation.
Filter Access Cover
Handle
Questions & Answers
How can I get the most out of my Electronic Air Purifier?
For peak efficiency in maintaining air quality, we
recommend that the unit be operated continuously.
My Air Purifier makes a snapping sound...
You may notice an occasional snapping or arcing sound
coming from your unit. This is a normal occurrence that
happens when large particles are electrically charged in the
Electronic Filter. Prolonged or continuous arcing is an
indication that the filter should be cleaned or that the filter
has been damaged.

Replacement Filters

If replacement filters are needed please contact your dealer.
The part numbers below will help you order the correct
filters for your electronic air purifier.
Filter Assembly
4
Item Part number
Pre-filter 123324-003
Charcoal filter 310200010-001