Heating Mode(Heat Pump Model Only) - LG ABNQ30GM2T2 Owner's Manual

Heating Mode(Heat pump model only)

supplies warm air to the room.
What is the three-minute delay function?
It provides time for the product to blow out hot air. The delay is to protect the compressor.
When the compressor starts running after three minutes, hot air will be blown in the room for
heating.
!
NOTE
• Heating mode only operates at the cooling and heating model.
• Heating doesn't operate at cooling exclusive model.
OPERATING INSTRUCTIONS
It
1 Press the key to run the machine, then
press the key to select the heating mode.
2 Set the desired temperature to be higher than
the current room temperature.
Pressing the button once will increase
the desired temperature by 0.5 ° C or
1 ° C
Pressing the button once will
decrease the desired temperature by
0.5 ° C or 1 ° C
- Temperature setting range:
16 ˚C ~ 30 ˚C (60 ˚F ~ 86 ˚F)
- If the set temperature is lower than the
current room temperature, the heating
function will not be turned on.
If pressing the mode button at run time, the
3
operation mode will be changed into cooling,
dehumidification, heating, automatic operation
or air supply modes.
4 Pressing the
mode.
key can stop the heating
11