Rio GO User Manual page 19

© Copyright The Dezac Group Ltd. 2014
4. Use the +/- buttons to select the correct power level for your skin type. Refer to the
level guide on page 12 to determine what level is suitable for your skin type.
Note: Each time the power level is adjusted you will need to repress the scan mode button
or single mode button to continue.
5. Select the treatment mode, either
(see treatment modes
Note: When switching between treatment modes, you will hear the laser resetting.
6. Place the unit onto the skin over the area you wish to treat ensuring the touch pins are in
contact with the skin. Go Laser has a skin detect feature; when correctly positioned the blue
treatment light will illuminate.
HOW TO USE
scan mode or
on page 17).
19
single hair mode.
power