Macintosh; System Requirements - Canon 310 Software Manual

System Requirements

Macintosh

Computer Model:
Power Macintosh, PowerBook, iMac, iBook
OS:
Mac OS 8.6-9.2 (DVC Storage Driver is compatible up to Mac OS 10.1.)
CPU:
PowerPC
RAM:
20 MB or more of application memory
Interface:
USB: only systems equipped with genuine Apple-brand built-in USB interfaces
Free Hard Disk Space:
• Canon Utilities
- ImageBrowser
- PhotoStitch
Display:
800 × 600 pixels/256 colors or better, 1,024 × 768 pixels/32,000 colors or better
is recommended
Notes:
• Proper operation is not guaranteed on a dual CPU PC or on a user-built PC.
• Proper operation is not guaranteed on any particular system, even if it meets the
requirements outlined above.
• A CD-ROM drive is required to install the software.
• Connect the camcorder directly to a USB port on the computer; not through a
hub. The connection may not operate correctly through a hub.
• The connection may not operate correctly if you are using other USB devices,
excluding USB mice or keyboards, at the same time. If this occurs, disconnect
the other devices from the computer and try reconnecting the camcorder.
• Do not connect two or more camcorders to the same computer via the USB
interface. The connections may not operate correctly.
20 MB or more
30 MB or more
E
53