Automatic Redialing; Manual Redialing - Canon PIXMA MX300 Series Quick Start Manual

Dialing the Coded Speed Dial
1
Prepare for faxing.
See "Prepare for faxing." on page 42.
2
Press the Coded Dial button.
3
Press the Numeric buttons to enter the two-digit code (00 - 19) assigned to the
number you want to dial.
4
Press the Color button for color sending, or the Black button for black & white
sending.
Important
Color sending is available only when the recipient's fax machine supports color faxing.
Note
To cancel sending a fax, press the Stop/Reset button. To cancel sending a fax while it is being
sent, press the Stop/Reset button, then follow the instructions on the LCD.
Redialing
There are two methods of redialing: Automatic redialing and Manual redialing. Automatic
redialing is enabled by default.

Automatic Redialing

When using memory sending to send a document and the recipient's line is busy, the
machine will redial the number after a specified interval.
You can customize the following automatic redialing settings:
• Whether or not the machine redials automatically
• The number of times the machine redials (1 to 10 times)
• The time interval between redials (1 to 99 minutes)
To change the automatic redialing settings, change the AUTO REDIAL settings in TX
SETTINGS under FAX SETTINGS.
Note
The range of values you can set for the automatic redialing settings varies depending on
the country or region of purchase.
To cancel automatic redialing while redialing is in progress, press the Stop/Reset button,
then follow the instructions on the LCD.
To cancel automatic redialing when redialing is standing by, delete the unsent document
from the machine's memory. For details, see "Printing or Deleting a Document in Memory"
on page 52.

Manual Redialing

To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.
Note
For details on sending faxes, see "Sending Faxes (Memory Sending)" on page 42.
To cancel manual redialing, press the Stop/Reset button.
Faxing 43