Chapter 9: Specifications; Switch Physical Design - Dell EMC PowerSwitch Z9100–ON Installation Manual

This topic lists the Z9100–ON specifications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced.
Replace only with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's
instructions.
NOTE: For RoHS information, see
Topics:
•

Switch physical design

• IEEE standards
• Agency compliance
• USA Federal Communications Commission statement
• European Union EMC Directive Conformance statement
• Japan VCCI Compliance for Class A Equipment
• Korean certification of compliance
• Safety Standards and Compliance Agency certifications
• Electromagnetic Compatibility
• Product recycling and disposal
Switch physical design
Table 7. Switch physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
Table 8. Environmental parameters
Parameter
Operating temperature
Operating humidity
Restricted Material Compliance.
Specifications
1.72 inches (44 mm)
17.1 inches (434 mm)
Chassis: 18.2 inches (462 mm)
Handle: 1.57 inches (40 mm)
19 lbs (2* PSUs)
8.62 kg (2*PSUs)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
Specifications
32° to 113°F (0° to 45°C)
5 percent to 85 percent (RH), non-condensing
Specifications
NOTE: Reduce maximum temperature by 1°C/300 meters
(1°F/547 feet) above 950 meters (3,117 feet).
9
Specifications 39