Back Panel Connectors - Gigabyte MZ72-HB0 User Manual

1-6

Back Panel Connectors

u
Serial Port
u
Connects to serial-based mouse or data processing devices.
10/100/1000 Server Management LAN Port
v
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
USB 3.0 Ports
w
The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
10GBASE-T RJ-45 LAN Port #2
x
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
section below for a description of the states of the LAN port LEDs.
10GBASE-T RJ-45 LAN Port #1
y
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
section below for a description of the states of the LAN port LEDs.
ID button with LED
z
When the system identification is active, the ID LED on the front/ back panel glows blue.
VGA Port
{
Connects to a monitor device.
LAN and ID Button LEDs
Speed LED Link/Activity LED
LAN Port
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
v
x
w
10GbE LAN LED:
State Description
Yellow On 5Gbps, 2.5Gbps, 1Gps data rate
Green On 10Gbps data rate
Off 100Mbps data rate
ID button/LED:
State Description
Blue On System identification is active
Off System identification is disabled
- 17 -
y
z
10/100/1000 LAN LED:
State
Yellow On
Green On
Off
{
Description
1Gbps data rate
100Mbps data rate
10Mbps data rate
Hardware Installation