Canon MultiPASS C3000 Software Manual page 22

Paper Size
You select the size of the paper you are using for printing a fax.
Answer Receive Mode
You select the mode by which you want the MultiPASS to receive
incoming calls:
•
Automatically switch for receiving a call either as a fax or
telephone call
•
Automatically receive only fax calls
•
Require you to manually answer the incoming call and then set
the MultiPASS for an incoming fax
•
Automatically receive a call with your answering machine
•
Automatically switch between receiving a call either as a fax or
telephone call based on the ring tone for each type of call. (U.S.
only. This setting is applicable only if you subscribe to a special
network service with your phone company that defines multiple
ring tones for your phone line.)
Answer Silent Receive
You select this option to set the MultiPASS to not ring for an
incoming fax.
Receive Conditions
You specify how the system should handle an incoming fax under
the following conditions:
•
If your computer is turned off
You set the MultiPASS to print the fax or save the fax in its
memory.
•
If your computer is turned on
You set the MultiPASS to move the fax to the Desktop Manager
on your computer, or to print the fax.
18 MultiPASS Desktop Manager Update
MAINTENANCE RELEASE/V000/08-98