Canon Color imageCLASS MF8170c Additional Instructions

for the Basic Guide, Facsimile Guide and
Please note the following additions and corrections for the pages listed below in each
manual.
Basic Guide
■P.2-22
"The Number of Output Sheets" of "face down" for "Plain Paper" and "Recycled Paper"
should be corrected as follows:
Incorrec t
approx. 100 sheets
■P.5-3
The following IMPORTANT statement should be added:
IMPORTANT
When you make copies immediately after connecting the power cord, the print
quality may deteriorate. Make copies after making sure the sound of machine
operation stops.
■P.5-7
The following statements should be added in "Adjusting the Color Balance" section:
Please refer to this note when you use the color balance setting for color-copy.
When the preview image is
yellow-looking.
When the preview image is
magenta-looking.
When the preview image is
cyan-looking.
When the preview image is
red-looking.
When the preview image is
green-looking.
When the preview image is
blue-looking.
Note : Adjustment on the monotone area have an instant effect on your imaging.
Additions and Corrections
Set-Up Instructions for the Machine
Change the yellow to lower side, or change the
magenta and cyan to higher side.
Change the magenta to lower side, or change the
yellow and cyan to higher side.
Change the cyan to lower side, or change the yel-
low and magenta to higher side.
Change the yellow and magenta to lower side, or
change the cyan to higher side.
Change the yellow and cyan to lower side, or
change the magenta to higher side.
Change the magenta and cyan to lower side, or
change the yellow to higher side.
Correct
approx. 80 to 100 sheets