Connecting To A Tv; Shooting/Playback Using A Tv - Canon Powershot SD1100 IS User Manual

176

Connecting to a TV

Shooting/Playback Using a TV

You can use the supplied AV cable to shoot or playback images using
a TV.
1
Turn off the camera and the TV.
2
Connect the AV cable to the
camera's A/V OUT terminal.
• Hook your fingernail or the wrist
strap toggle under the bottom edge
of the camera's terminal cover to
open it, then insert the AV cable all
the way into the connector.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 56). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and
others
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO AUDIO
Yellow
Black