Searching For Images Using The Jump Display - Canon Powershot SD1300 IS User Manual

Searching for Images Using the Jump
Display
When there are many images on the memory card, you can search them by
a specified method or image unit.
Position of currently
displayed image
Jump 10 Images
Jump 100 Images
Jump Shot Date
Jump to first
Jump to Movie
• The number of images matching the search filter will appear on the right side of the
screen except for
If there are no images matching the jump method, the qr buttons will not
function.
Choose a jump method.
● In Single Image Playback, press the o
button.
The search method and the position of the
currently displayed image will appear at
the bottom of the screen.
Press the op buttons to choose the
●
desired search method.
Switch images.
● Press the qr buttons.
The camera will use the chosen search
method to jump to an image.
●
To return to Single Image Playback, press
the n button.
Jumps over 10 images at a time.
Jumps over 100 images at a time.
Jumps to the first image in each shooting date group.
Jumps to still images only.
Jumps to a movie.
and .
95