Changing Shooting Function Settings - Canon Powershot SD1300 IS User Manual

Changing Shooting Function Settings

If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 47).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 132 – 133).
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
●
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
●
Choose [Flash Settings], then press the
m button.
Press the op buttons to choose [Red-
●
Eye Lamp], then press the qr buttons to
choose [Off].
117