Connecting To A Serial Port (Printer Or Modem Port) - Canon Powershot S100 2MP Digital Elph Software Manual

62

Connecting to a Serial Port (Printer or Modem Port)

The serial port interface is only supported by the PowerShot S10 and PowerShot S20
models.
1. Shut down the computer and turn the camera power off.
2. Attach the supplied serial cable to a serial port on the computer and to
the camera's DIGITAL terminal as shown below.
• Please consult your computer's manual for the location of the serial port.
3. Turn on the computer.
About AppleTalk
• When connected via the serial interface using AppleTalk, open the Apple menu
select [Chooser] and turn AppleTalk to [Inactive].
Precaution for Unplugging Cables
from the DIGITAL Terminal
• Always press the [PUSH] button on the
connector to detach the cable from the
camera's DIGITAL terminal.
DIGITAL Terminal
1. Open the DIGITAL terminal cover
by slipping a fingernail under the
top edge and pulling down.
2. Insert the connector so that the
the connector and camera align.
Printer Port
Modem Port
Serial Connector
Serial Connector
marks on
PUSH Button
,