Canon Powershot A650 IS User Manual page 98

96
Various Shooting Methods
Changing the AF Frame Position ([FlexiZone])
You can move the AF frame to any position. This allows you to set the
focus more precisely on your target subject.
1
Press
green.
• In some shooting modes, pressing the
between the following settings categories.
Exposure compensation/AF Frame
Shutter speed/Exposure compensation/AF Frame
Aperture value/Exposure compensation/AF Frame
Shutter speed/Exposure compensation/AF Frame
2
Use the
ton to move the AF frame
to the desired position
and press the
• Pressing the MENU button shifts
the AF frame to a face detected
by the camera.
• You can change the AF frame size by pressing the DISP.
button (the change remains in effect even after the camera
power is switched off).
• Continuing to press the
return to its original position in the center (and it also
switches between the settings categories shown above).
When the metering option is set to [Spot], you can make
the AF frame and spot metering frame correspond
(p. 110).
This option cannot be selected in manual focusing mode
(p. 97).
The AF frame returns to the center position when the
power is switched off.
repeatedly until the AF frame turns
, , or
button.
button switches
but-
button causes the AF frame to