Canon Powershot G1 User Manual page 11

To Immediately Delete the Displayed
Image
1. Press the button while the image is displayed.
2. Press the arrow on the omni selector to select
[OK].
3. Press the Set button.
Turn the mode dial (upper dial) to
6
(p. 37).
Focus (p. 34).
7
Aim the camera and lightly press the shutter
button halfway. Two beeps will sound when the
autofocus is set.
8 Shoot (p. 34).
Press the shutter button all the way. You will hear
the sound of the shutter close when the shot is
complete.
View the recorded image (p. 39).
9
The recorded image will display in the LCD
monitor for approximately 2 seconds. Keep your
finger on the shutter button or press the Set
button while the image is displayed to continue
to display the image after the shutter button is
released.
9
Quick Start