Mounting The Transmitter - Silvercrest SFS 16 C3 Quick Start Manual

Mounting the transmitter

♦ Select a suitable positioning for the sender, close to
your outer door.
♦ Mark the positions for the required drill holes with the
help of the mounting plate
the supplied wall plugs
♦ Push the wall plugs into the drill holes and screw the
mounting plate
♦ Push the transmitter onto the mounting plate
clicks audibly into place.
NOTE
► Alternatively, you can mount the transmitter onto a
suitable surface using the double-sided adhesive
tape .
SFS 16 C3
and drill the holes for
(5 mm drill).
onto the wall using the screws
GB │ IE │ NI │ CY
.
until it
│
19 ■