Canon DIGITAL IXUS V2 User Manual page 97

Direct Interface
Cable (DIF-200)
Align the symbols on
the camera and cable to
connect them.
This shows when a
direct print function
compatible printer is
connected.
Connecting to a Bubble Jet Printer
• Please read the Quick Start Guide supplied with your BJ
printer to see if it is compatible with camera's direct print
function, and for instructions on connection cables and
general operation.
Shut the camera's
power off (p. 26).
• Attach the direct interface cable to the
printer.
• Open the terminal cover on the camera
and insert the cable's connector into
the camera's DIGITAL • A / V OUT
terminal. Orient the cable so that the
connector's
camera's front panel.
• Set the mode switch to the
and turn on the camera's power.
• will display when the printer is
correctly connected.
Printing
symbol faces the
position
95