2/45
About this documentation
1.2 Purpose
This operating instructions provides information on the safe mounting and the
electric installation of the Safety extension module IndraControl XFE01.1-SY-01
to the technical employees of the machine manufacturer or the machine
operator. This documentation does not provide instructions on the operation of
the machine into which the Safety extension module IndraControl XFE01.1-SY-01
is or will be integrated. The operating instructions of the machine contains the
information.
1.3 Qualifications
Required qualification: Individual who is able to assess the tasks assigned and
to identify possible safety risks owing to qualification in the subject, knowledge
and experience. The individual should also be familiar with the standards and
regulations.
1.4 Scope
This operating instruction applies to the Safety extension module with the type
code "XFE01.1-SY-01".
For the type code specifications, refer to
page
37.
1.5 Related documents
Title
IndraWorks 14VRS
SafeLogic
Project Configuration
IndraWorks
SafeLogic 14VRS
First Steps
Bosch Rexroth AG R911376654_Edition 03
IndraControl XFE01.1-SY-01 Safety Ex-
chapter 15 "Ordering information" on
Description
R911341694
Application Description
This documentation is intended as guideline when creating a
safety-related application
R911341520
Commissioning Manual
This documentation contains descriptions about the
following topics:
Creation and use of a safety application
●
Basics of the data exchange between the safety
●
application and the standard application of the IndraLogic
XLC/IndraMotion MLC/IndraMotion MTX 14VRS
Information on diagnostics and troubleshooting
●
Programming under SafeLogic
●
tension Module