About This Documentation; Overview On Target Groups And Product Phases - Bosch Rexroth IndraControl XFE01.1-SY-01 Operating Instructions Manual

IndraControl XFE01.1-SY-01 Safety Ex-
tension Module

1 About this documentation

Editions of this documentation
Edition Release
Date
Edition 01 2016-10
Edition 02 2017-06
Edition 03 2019-05
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the
"mechanic/electrician" can execute the activity "unpack, mount and install" using
this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
Note
First edition
Chapter "Safety standards" revised, new chapter "Ordering data",
standards and warning instructions modified for UL
References supplemented
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
About this documentation
Commissioning Operation
Programmer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
Create
the NC program
R911376654_Edition 03 Bosch Rexroth AG
1/45
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
faults