Reference Clock Cables - Nortel QPC757 Installation Manual

NTD12 Dual-port DTI/PRI card description and installation

Reference clock cables

The NTCG03AA (14 ft), NTCG03AB (2.8 ft.), NTCG03AC (4.0 ft.), or
NTCG03AD (7 ft.) is a DDP card to Clock Controller cable, connecting each
of the CLK0 or CLK1 ports on the DDP faceplate to the primary or secondary
source ports on Clock Controller card 0 or 1.
P1
Connector P1 -
Connector P2 -
Note:
Includes an RJ11<-->9 pin D-type adaptor.
14, 7, 4, or 2.8 ft.
4 pin, male, RJ11 (DDP faceplate)
9 pin, male, D-type (Clock Controller)
Page 121 of 188
P2
ISDN PRI Installation